Anritsu MT8801C - Page 204

4-149
4.3 CDMA Transmitter and Receiver Test --- TX and RX Tester Mode
• Displaying files
This paragraph describes how to display the files in FD.
Step Key operation Description
1. Insert a floppy disk (FD) into the FD driver at the bottom left of the
MT8801C.
2. [Main Func on off] F6 Turn the Main Func on to display the main function keys.
3. Next Menu [ ] Displays the second page of the main function keys.
4. [File Operation] F4 Moves to the File Operation screen. Accesses the FD to display the root
directory.
5. Cursor [ ] [ ] Specify the directory to be required.
6. [Set] or [Enter] Moves to the specified directory to display its contents.
7. Repeat the Steps 5 and 6 above to display the required directory.
Note:
The sub-directories and file name under the selected directory are displayed in
the frame on the left of the screen.
For directories, only their names are displayed in the “Name” field.
For files, Name/Date/Time are displayed.
The Directory field at the upper right of the screen displays the layer and loca-
tion of the selected directory.
• Write-enabling/write-protecting files
This paragraph describes how to change the file write mode between the write-protected and write-enabled modes.
Step Key operation Description
1. Select the directory of the desired file by the displaying-file procedure above.
2. Cursor [ ] [ ] Specify the file.
3. [Write Protect] F10 Changes the file write mode.
• Deleting files
This paragraph describes how to delete the parameter/data files.
Step Key operation Description
1. Select the directory of the desired file by the displaying-file procedure above.
2. Cursor [ ] [ ] Specify the file.
3. [Delete File] F11 Opens the confirmation window.
4. Cursor [ ] [ ] Select Yes or No. “Yes” deletes the specified file.
Note:
Once a file is deleted, it cannot be restored.