Section 4 Operation
4-150
• Initializing (formatting) floppy disk
This paragraph describes how to initialize a floppy disk.
Step Key operation Description
1. Insert a floppy disk (FD) into the FD driver at the lower left of the MT8801C.
The acceptable FD is the 2HD (1.44 M-bytes) or 2DD (720 k-bytes) type.
2. Next Menu [ ] Displays the second page of the function keys.
3. [Format] F7 Initializes the floppy disk. During initialization, a window indicating
initialization appears on the screen.
4. Next Menu [ ] Returns to the first page of the function keys.
Note:
Once a floppy disk is initialized, the data recorded on the disk is all lost.
To Next Page
Loading...
