Section 8 Storage and Transportation
8-2
8.1 Cleaning the Cabinet
Always turn the MT8801C power switch OFF and disconnect the power plug from the
AC power inlet before cleaning the cabinet. To clean the external cabinet:
• Use a soft, dry cloth.
• Use a cloth moistened with diluted neutral cleaning liquid if the instrument is very
dirty or before long-term storage. Then, use a soft, dry cloth to wipe the instrument
dry.
• If loose screws are found, tighten them with the appropriate tools.
CAUTION
Never use benzine, thinner, or alcohol to clean the cabinet;
these chemicals may damage the coating or cause deforma-
tion or discoloration.
8.2 Storage Precautions
This paragraph describes the procedures for long-term storage of the MT8801C.
8.2.1 Precautions before storage
(1) Before storage, wipe dust, finger-marks, and other contaminants off the
MT8801C.
(2) Avoid storing the MT8801C where it may be exposed to:
(a) Direct sunlight or high dust levels.
(b) High humidity.
(c) Active gasses or acid.
(d) The following temperatures or humidity:
• Temperature: ........... >60°C, ≤20°C
• Humidity: ................ ≥90%
8.2.2 Recommended storage conditions
The recommended storage conditions are as follows:
• Temperature: ....... 0 to 30°C
• Humidity: ............ 40% to 80%
• Stable temperature and humidity over a 24-hour period.
To Next Page
Loading...
