Anritsu MT8801C - Page 278

8-3
8.3 Repacking and Transportation
8.3 Repacking and Transportation
Take the following precautions if the MT8801C must be returned to Anritsu Corpora-
tion for servicing.
8.3.1 Repacking
Use the original packing materials. If the MT8801C is packed in other materials,
observe the following packing procedure:
(1) Wrap the MT8801C in a plastic sheet or similar material.
(2) Use a cardboard box, wooden box, or aluminum case which allows shock-ab-
sorbing material to be inserted on all sides of the MT8801C.
(3) Use enough shock-absorbing material to protect the MT8801C during transpor-
tation and to prevent it from moving in the container.
(4) Secure the container with packing straps, adhesive tape,or bands.
8.3.2 Transportation
Do not subject the MT8801C to severe vibration during transport. Also, transport
under the storage conditions recommended in paragraph 7.2.