1-7
Table 1-6 MT8801C Specifications (continued)
Display
Hard copy
External control
Dimensions
Mass
Power supply
Operating temperature range
Conducted Emission
Radiated Emission
Harmonic Current Emission
Electrostatic Discharge
Electromagnetic Field Immunity
Fast Transient / Burst
Surge
Conducted RF
Power Frequency Magnetic Field
Voltage Dips / Short Interruptions
Others
Dimensions
Mass
Power supply
EMC
GPIB
Parallel
RS-232C
Color TFT LCD display
Size : 8.4 inches
Number of dots : 640 × 480
Enables data hard copy on the display through a parallel interface.
(applicable only for EPSON VP-series or equivalent)
Function : This equipment is specified as a device, can be controlled from
external controller. (excluding power switch and FD ejection key)
No controller function
Interface function : SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, and E2
Function : Conforms to the Centronics. Outputs printing data to a printer.
Data line exclusive for output: 8
Control line: 4 (BUSY, DTSB, ERROR, PE)
Connectors : D-sub 25 pins, Female (Equivalent to the connector of IBM-PC/AT built-in printer)
Controlled from an external controller (except for the power switch)
Baud rate : 1200, 2400, 4800, or 9600 bps
221.5 mm (H) × 426 mm (W) × 451 mm (D)
≤27 kg (without any options)
100 to 120 V, 200 to 240 V 47.5 to 63 Hz, ≤300 VA Automatic voltage switch system
0 to 50°C
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61000-3-2: 2000
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
EN61326: 1997 / A2: 2001
1.5 Specifications
To Next Page
Loading...
