B-1
• The initial value is the value set at factory shipping.
• Items marked with an asterisk (*) is not displayed or selected by default.
• “PS” in the “Initialization” column on the rightmost on the table indicates the item that is initialized with the [Preset]
key on the front panal or PRE/INI of the remote control commands.
“PW” indicates the item initialized with the *RST of the remote control command.
Items initialized with the PRE/INI commands can also be initialized with the *RST command.
• Items not initialized with those commands above are indicated as “NO.”
• Change System screen
No initial values
• Instrument Setup screen
Item Initial value Initialization
Frequency
Reference Frequency 10 MHz PW
RF Input/Output Main PW
Display PW
Display Title User Define PW
Clock Display YY/MM/DD (Year, Month, Day) PW
Interface
Connect to Controller GPIB No
GPIB
Address 01 No
RS232C
Baud Rate 2400 bps No
Parity Even No
Data Bit 8 bits No
Stop Bit 1 bit No
Hard Copy
Output Device Printer (Parallel) PW
Type ESC/P PW
Alarm On PW
[Power On Initial] F9: Previous Status No
[File No.] F9 0 No
• Change Color menu
Item Initial value Initialization
Change Clr. menu Color Pattern 1 No
[Define User Color] F11 No
Appendix B Initial Values
To Next Page
Loading...
