Anritsu MT8801C - Page 303

Appendix B Initial Values
B-2
• Setup Common Parameter screen
Item Initial value Initialization
Call Proc. Stop PW
DUT Control Call Proc. PW
Using Specification IS-95A PW
Frequency
Band 800 MHz PW
Channel 1 PW
TX Meas. frequency 825.030 MHz PW
RX Meas. frequency 870.030 MHz PW
Channel Spacing 30.000 kHz PW
Level
Reference Level 30 dBm PW
Auto Set Off PW
BS Output Level -55.0 dBm PW
Cal Mode Manual PW
AWGN Level -20.0 dB PW
AWGN On,Off Off PW
NOM_PWR 0 dB PW
INIT_PWR 0 dB PW
Signal
Service Option SO2 PW
Traffic Channel Data Rate Full PW
• Setup TX Measure Parameter screen
Item Initial value Initialization
User Cal Factor (TX) 0.00 dB PW
Power Measure Method Power Meter PW
PWR_STEP 1 dB PW
NUM_STEP 4 PW
MAX_RSP_SEQ 3 PW
Measuring Period 80 Frame PW
Measuring Number 15 AP PW
• Modulation Analysis screen
Item Initial value Initialization
[10 Burst Average] F8: Off PS
[Storage Mode] F9: Normal mode PS
[Average Count] F9 10 PS
[Refresh Interval] F10: Every PS