Anritsu MT8801C - Page 304

B-3
• RF Power screen
Item Initial value Initialization
1st pager
[Window] F7 Slot PS
[Marker] F8 Off mode PS
[Normal] F7 The screen center: 700.00 µsPS
[Storage Mode] F9 Normal mode PS
[Average Count] F9 10 PS
2nd page
[Unit] F9 dB PS
[Level Rel./Abs.] F10 Relative PS
• Setup Template screen
Item Initial value Initialization
Line Level
1 -20.0 dB PW
2 -3.0 dB PW
[Recall Template] F7 PS
[File No.] F9 0 –
[Save Template] F8
[File No.] F9 0 –
• Power Meter screen
Item Initial value Initialization
Power Measure Method is Power Meter.
2nd page
[Power Measure Method] F7 Power Meter PS
[Power Control Bit Pattern] F8 Alternate PS
Power Measure Method is IF Level Meter.
1st page
[Storage Mode] F9 Normal mode PS
[Average Count] F9 10 PS
[Refresh Interval] F10 Every PS
2nd page
[Power Measure Method] F7 Power Meter PS
[Power Control Bit Pattern] F8 Alternate PS
Appendix B Initial Values