Anritsu MT8801C - Page 305

Appendix B Initial Values
B-4
• Standby Output Power screen
No initial values.
• Access Probe Measure screen
No initial values.
• Open Loop Time Response screen
Power Meter screen
Item Initial value Initialization
1st page
[Marker] F9 Off mode PS
[Normal] F7 The screen center: 50.0 ms PS
• Setup Analog TX Measure Parameter screen
Item Initial value Initialization
User Cal Factor 0.00 dB PW
RF measure mode All PW
Demod output terminal (real panel)
Range 40 kHz PW
HPF 300 Hz PW
LPF 3 kHz PW
De-emphasis Off PW
Squelch Auto PW
• Analog TX Measure with SG screen
Item Initial value Initialization
• Main function key :
Second page
[RX RF Level On Off]F4 Off PS
• AF Level function key :
First page
[Distortion Unit]F7 % PS
[Filter]F9 Off PW
[HPF]F10 Off PW
[De-emphasis]F11 Off PW
Second page
[Strage Mode]F9 Normal PS
[Average Count]F9 10 PS
• TX RF Frequency function key :
[Frequency]F7 825.030000 MHz PW
[Channel]F8 1 CH PW