6.
Fill in the remaining rows by manually entering and selecting information, by
using Fill Down commands, or by copy/pasting.
Fill Down Copy/paste
Select the entire row, select Edit4Fill
Down Special, then select a fill down
option.
For 48-capillary instruments, select Fill
down Special (48 Cap).
For 96-capillary instruments:
• 96-well plate: Select Fill Down.
• 384-well plate: Fill down Special
(96 Cap).
• If you copy multiple cells, select the
same number of corresponding
target cells before you paste.
• You can copy/paste within one
protocol.
Note: Use the Duplicate function in
the Plate Manager to copy
information from an existing
protocol to a new protocol.
7.
Click OK.
1.
In the navigation pane of the Data Collection Softw
are, select
GA
Instruments4 ga37304 Instrument name4 Run Scheduler.
2.
In the Add Plate eld, type the Plate ID then press Enter or scan the bar code of
a plate to add it to the input stack.
3.
Place the plate assembly into the instrument. See “Place plate assemblies into the
instrument“ on page 44.
Run the spectral
c
alibration plate
Chapter 8 Calibr
ate the instrument
Perform spectral calibration for sequencing and fragment analysis
8
3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide
101