4.
In the toolbar of the Data Collection Software window, click . Click OK in the
Processing Plates dialog box.
You can view the capillary-by-capillary processing status during a spectral
calibration run in the Event Log. See “V
iew the Event Log“ on page 68.
5.
When the run is nished, remove the plate from the instrument.
1.
Open the stacker drawer.
2.
Open the door of the In Stack tower.
Place plate
as
semblies into
the instrument
Chapter 8 Calibr
ate the instrument
Perform spectral calibration for sequencing and fragment analysis
8
102
3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide
To Next Page
Loading...
Need help?
General
