1.
Close the instrument door.
1
Instrument door
2.
Press the tray buon to bring the autosampler to the forw
ard position.
3.
After the autosampler stops moving and the green status light illuminates, open
the instrument door.
1
Status lights
2
Tray button
4.
Remov
e the buer, water, and waste reservoir assemblies from the instrument.
5.
Disassemble each reservoir assembly and empty the contents of the reservoirs
into an aqueous waste container.
1
Aqueous waste
6.
Rinse each reserv
oir using deionized water.
Perform a short-
term shutdown
Chapter 9 Maint
enance
Perform a short-term shutdown
9
3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide
127