Applied Biosystems 3730xl User Manual

• Use 3 mm Thermo Fisher Scientic heat seal lm (Cat. No. 4337570). This lm is
3 mm thick before heating and
1 mm thick after heating.
• Do not use heat seal lm that is thicker than 1 mm after heating.
• Do not use heat-seal lm that contains adhesives or metals. These seals can
damage the internal needles that pierce the lm before the injection.
Place plate assemblies into the instrument
1.
Open the stacker drawer.
2.
Open the door of the In Stack tower.
3.
Place the plate assemblies into the stacker
. Ensure that the notched corner of the
plate assembly is at the rear right corner of the stacker.
IMPORTANT! Do not place more than 16 plates in the stacker.
1
Notched corner
Important heat
seal
recommendations
Chapter 2 Prepare the instrument
Place plate assemblies into the instrument
2
44
3730xl DNA Analyzer with 3730xl Data Collection Software 5 User Guide

Applied Biosystems 3730xl Specifications

General

Brand	Applied Biosystems
Model	3730xl
Category	Measuring Instruments
Language	English