Atlas Copco SmartROC D65 T4F - Page 184

SmartROC D65 T4F 10 Options
184 No: 713944459.6 en
Menu Submenu Description
l MNU = This func-
tion is used to ac-
cess the user menu
via the Enter key
(8).
l IMM = Immediate
standby
l 2S = Standby after
a 2-second delay.
n Standby, camera off - The
power to the camera is
switched off during Standby
CAN-bus Factory setting
LCD background lighting
n LCD lighting mode ABC =
Activates automatic control
of background lighting.
n ABC level = Indicates the
minimum brightness that the
ABC can use when the am-
bient light is weak.
n LCD background lighting
daytime = Manual setting of
daytime brightness
(50-100%).
n LCD background lighting
night-time = Manual setting
of night-time brightness
(0-50%).
Scanning
n Scanning sequence = Se-
lection of cameras from
which images are shown in
sequence.
n Scanning interval = Selec-
tion of how long a camera
image is shown.
Camera changer Configuration of current camera
system. Setting options:
n AV = 1 camera
n 2C = 1 camera + DVD, or 2
cameras
n 4C = 3 cameras + DVD
Front camera Activates front camera function-
ality
Standard settings Reset to factory settings. 1 =
Supplier's standard settings.
There is the option to create 16
sets of settings.