SmartROC D65 T4F 10 Options
206 No: 713944459.6 en
1.
Open the Administrate consumables menu.
2.
Select Import consumables list.
è
The system looks on the USB memory for a text file called CONSUMABLES.TXT.
!
NOTE: The text file can be created manually with any text editor or
by being exported to the USB memory via the Export consum-
ables list function. The file must be called CONSUM-
ABLES.TXT.
NOTE: The import process continues as long as there is room for
more objects in the system. An object already present in the sys-
tem will be ignored. After import, a warning appears showing if
there were too many objects or duplicates.
Rod Tracker
The Rod tracker function keeps control of the current position of each drill rod in the carou-
sel which is fed into the system. This means that the system can log the correct drill length
for each rod as it is used.
Calibrate Rod Tracker
1.
Select the RHS menu.
2.
Select the Rod tracker menu. The graphic Rod tracker menu is shown.
3.
Select Calibration.
To Next Page
Loading...
