EasyManuals Logo

Atlas Copco SmartROC D65 T4F User Manual

Atlas Copco SmartROC D65 T4F
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
SmartROC D65 T4F 5 Controls
51 No: 713944459.6 en
Grey/Green info Option Green=Laser receiver
has received a hit on the laser
plane. Grey=No hit or option not
activated.
Red fault Oil stop valve pressure - Indic-
ates that the pressure is too low.
Engine stopped automatically.
Yellow warning High exhaust gas temperature
(HEST) - Illuminated when re-
generation has been started.
Yellow warning High soot level in the particle fil-
ter (DPF) - Shown when the soot
level is > 90%
Yellow warning Automatic regeneration blocked
- Used when there is a risk of
personal injury or damage to
property.
Yellow warning Illuminated when the DES sys-
tem (Delayed Engine Shutdown)
is activated.
Yellow warning Self-holding of drilling lever
stops - Illuminates when the soot
level reaches 100%. If this oc-
curs, switch off the engine and
contact authorised service per-
sonnel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atlas Copco SmartROC D65 T4F and is the answer not in the manual?

Atlas Copco SmartROC D65 T4F Specifications

General IconGeneral
BrandAtlas Copco
ModelSmartROC D65 T4F
CategoryConstruction Equipment
LanguageEnglish

Related product manuals