Atom Incu i 101 - Page 23

Parts Identification
21
PLEASE READ WITHOUT
FAIL
Description
Displays a detected skin tem-
perature 1 digitally.
Displays a set incubator air tem-
perature in manual control.
Displays a set skin tempera-
ture 1 in servo control.
Displays a detected incubator
air temperature digitally.
Indicates the heat supply in 10
levels.
comes on in manual con-
trol and comes on in
servo control.
(in manual control) or
(in servo control) comes on in
the override mode.
Displays a detected skin tem-
perature 2 or 왕T (detected
skin temperature 1detected
skin temperature 2) digitally.
No.
q
w
e
r
t
y
u
Name
Skin tempera-
ture 1 display
Set tempera-
ture display
Incubator air
temperature
display
Heater output
indicator
Mode indica-
tor
Override
indicator
Skin tempera-
ture 2 display
Description
Displays a detected relative
humidity in the incubator digi-
tally.
Displays a set relative humid-
ity digitally.
Indicates the level of water in
the humidity chamber or the
state of the humidity chamber.
No.
q
w
e
Name
Relative
humidity
display
Set relative hu-
midity display
Water level in-
dicator
Description
Displays a detected oxygen concen-
tration in the incubator digitally.
Displays a set oxygen concen-
tration digitally.
Indicates a detected oxygen
flow rate in 6 levels.
No.
q
w
e
Name
Oxygen concen-
tration display
Set oxygen con-
centration display
Oxygen flow
rate indicator
eq w
rtyu
q w
e
q w
e
[Temperature area]
❋ Touch this area to start the temperature-related setting operation.
[Relative humidity area]
❋ Touch this area to start the relative humidity-related setting operation.
[Oxygen area]
❋ Touch this area to start the oxygen-related setting operation.