Field Names and Descriptions
Issue 3 May 2002
5-55
Use this screen as follows:
■To change the port’s CV/LAN service state:
1. Press or use the arrow keys to move to the desired port.
2. Press to toggle the Service State.
NOTE:
Busying a port out causes all TCP connections on that port (if
any exist) to be closed. No new connections are permitted on
that port until the port is placed back in service.
3. The following prompt appears: Are you sure? (Y/N). Type Y
and press . The CV/LAN Port Status/Control screen
reappears showing the changed state.
If you type N and press , the CV/LAN Port Status/Control
screen immediately reappears.
Field Name Description
DEFINITY Port State
(continued)
■BUSIEDOUT — The BRI Port is administered on
the DEFINITY system but has been busied out in
the BRI driver on the MAPD.
■SW INTF DN — The DEFINITY system interface
(angel) is down.
■SW INTF DN BSY — The DEFINITY system
interface (angel) is down and the BRI Port has
been busied out in the BRI driver on the MAPD.
Number of Client
Connections
Read-only. Number of currently connected clients.
CV/LAN Service State Either in service or out of service.
Messages to the
DEFINITY
Read-only. The number of messages sent to the
DEFINITY system in the last message collection
period.
Messages from the
DEFINITY
Read-only. The number of messages sent by the
DEFINITY system in the last message collection
period.
Message Period The time period (in minutes) during which messages
are sent and received. This is a per port number.
Default = 30.
STATE
RETURN
RETURN
To Next Page
Loading...
Need help?
General
