CVLAN System Administration
5-56 Issue 3 May 2002
■ To drop all client connections for a specific port:
1. Press or use the arrow keys to move to the desired port.
2. Press to drop all client connections.
NOTE:
New connections are permitted on this port
3. The following prompt appears: Are you sure? (Y/N). Type Y
and press . The CV/LAN Port Status/Control screen
reappears showing the change.
If you type N and press , the CV/LAN Port Status/Control
screen will reappear.
■ To set the Message Collection Period for a port, select the port and press
. The Message Collection Period screen appears. If no ports are
administered, pressing does nothing.
TAB
DROP
RETURN
MSGPER
MSGPER
To Next Page
Loading...
