Avaya S8700 - Page 6

6
Installing the Avaya S8700 Media Server with G600 Media Gateway
October 2002
Disconnect from media server 1 35
• Connect Duplication Cables 37
Collocated media servers 37
Separated media servers 37
• Configure Media Server 2 37
Verify Software Version 38
Set server configuration type 39
Upgrade media server software (if necessary) 39
Continue server 2 configuration 40
Copy settings 40
Configuring manually 40
Update System 41
Verify Media Server 2 Connection to Customer’s
LAN (if provided) 41
Test Media Server 2 LEDs 42
Busy Out Standby Media Server 43
Disconnect from the Media Server 43
• Connect UPS Ethernet Cables to Ethernet Switch 44
• Configure the UPSs 45
Duplex Reliability Configurations 47
• Configure the Avaya Ethernet Switch (if used) 49
• Customizing the Active Media Server 51
Set up Avaya Site Administration 51
Directly through a dedicated services port 51
Remotely over the network 52
Starting Avaya Site Administration 52
Input Translations 53
Reset Media Server 53
Add Media Gateways 53
Administer and Enable the IP Media Server Interface 54
Add IPSI Translations to MultiVantage Software 55
• Installing the Avaya G600 Media Gateway 57
Check and Inspect the Order 59
Check Customer’s Order 59
Unpack and Inspect the Avaya G600 Media Gateway 59
Check Circuit Packs 61