7
Installing the Avaya S8700 Media Server with G600 Media Gateway
October 2002
Correct Shipping Errors 63
Set the Carrier Address ID 63
Mount the Avaya G600 Media Gateway in the Rack 64
Mount One Media Gateway 65
Mount Two to Four Media Gateways 69
Check AC Power and Ground for Avaya G600 70
Check AC Power 70
Approved grounds 71
Uninterruptible Power Supply 71
Media Gateway Power Switch 72
Connect Media Gateway Grounds and Other Grounds 73
Install Coupled Bonding Conductor 74
Connect the Power Cords 75
• Installing the Avaya G700 Media Gateway 77
• Cabling the G600 Media Gateways 79
Cabling Multiple Media Gateways 79
Cabling 2 Media Gateways 80
Cabling 3 Media Gateways 84
Cabling 4 Media Gateways 84
Install Circuit Pack Adapters 85
Connecting Media Gateways to the Phone Network 85
Install the Main Distribution Frame (MDF) Hardware 86
Install Patch Panels 91
Cross-connect the Media Gateway to the Patch Panels 91
Install Equipment Room Hardware for Avaya G600 94
Install Circuit Packs 94
Install Off-premises Circuit Protection 100
Install Sneak Fuse Panels 100
Set Ringing Option for Avaya G600 102
• Connecting the Hardware 105
Set IPSI Static IP Addresses 105
Reusing a TN2312AP circuit pack 106
Administering the static IP address 106
Connect the Ethernet Switch Cables to the IPSI Circuit Packs 108
Verify Connectivity to Media Servers 108
Verify IPSI firmware version 109
Enable control of IPSIs 109
Verify License Status 109
To Next Page
Loading...
