98
Cabling the G600 Media Gateways
October 2002
Circuit Pack Slot Loading
1 Check the reinstalled circuit packs. All of the circuit pack slots in the Avaya G600 are
“universal slots.” Any slot can contain any type of port circuit pack except that the
TN2312AP IP Server Interface circuit pack must be installed in slot 2 of media
gateway A. See ‘‘Avaya G600 Media Gateway and slot numbering’’ on page 98
.
2 Load all port circuit packs. See ‘‘Circuit pack installation order (loading)’’ on page 98
for the recommended circuit pack layout.
Avaya G600 Media Gateway and slot numbering
Circuit pack installation order (loading)
Function Apparatus code Load from Notes
IP Server Interface TN2312AP Slot 2 1 per port network
Call Classifier/Tone
Detector
TN744E Slot 3 Not required; the
TN2312AP provides
this functionality. May
want for additional
capacity.
Figer Cable Adapter
Assembly
NAA1 Slot to left of
slot 6
Required when G600 is
equipped with
TN2305B/6B
Control C-LAN TN799DP Left start with slot 4
Announcement TN2501 Any slot
LAN Gateway
(MAP-D)
TN801B Slot 7 3 slots are required.
Place in slot 8 if using a
NAA1.
IP Media Processor TN2302AP Right start with slot 10
scdlslot LJK 031102
1234
5
6
7
8910
102 3 4 5 6 7 8 9
Power
1
To Next Page
Loading...
