What does invalid signal for peaking mean on AvL Technologies Controller?
If the AvL Technologies Controller displays 'Invalid signal for peaking', it may indicate a possible signal threshold issue or peaking on an incorrect satellite.
What does it mean if there is an invalid target for this location on AvL Technologies AAQ Antenna?
If the AvL Technologies Controller displays 'Invalid target for this location', it means that the target may not be visible from the present location.
What to do if scanning will exceed Az Limits on AvL Technologies Controller?
If the AvL Technologies Controller displays 'Scanning will exceed Az Limits - Rotate Base and try again', rotate the base and try again.
General| Control | Ethernet, Serial |
|---|---|
| Operating Voltage | 100-240 VAC |
| Frequency Range | L-band, C-band, Ku-band, Ka-band |
| Input Power | 90-264 VAC, 47-63 Hz |
| Humidity | Up to 95% non-condensing |
| Interface | Ethernet, Serial |
Provides an overview of the AAQ controller's features, applications, and adaptability.
Details the two main hardware components: ACU and NAV RIOM, and their respective microprocessors.
Explains the AAQ software's scalable and modular design, including OS, ROM, PIC, CONFIG, and GUI.
Lists the physical and environmental specifications for the ACU and NAV RIOM components.
Specifies the operating system and .NET Framework prerequisites for the AAQ Remote GUI.
Guides through the installation process of the AAQ Remote GUI, including default locations.
Details factory IP addresses and configuration for network interfaces.
Explains how to customize AAQ Network IP settings using the AAQ Remote Settings tool.
Provides examples for setting up the AAQ controller for network communication.
Explains how to interpret various elements of the AAQ Remote GUI interface.
Details functions available under the File menu, including Settings and Calibration.
Covers options in the View menu for accessing Sensor Output, Configuration, and system logs.
Explains how to log in to the AAQ Controller system to access different user levels.
Provides instructions for installing the AAQ Remote GUI application.
Describes the initial login process and setting up IP configurations.
Explains the Profile System for creating and managing satellite acquisition settings.
Provides practical examples for creating and configuring satellite profiles.
Details hardware safety parameters and mechanical limits for system operation.
Covers static configuration parameters for system setup independent of target satellite.
Explains automated target acquisition configuration using the Profile System.
Discusses parameters for fine-tuning acquisition and peaking for each signal source.
Describes the Azimuth, Elevation, and Polarization drive systems and their components.
Provides a detailed description of the AAQ ACU's modular and parametric software architecture.
Explains the functional descriptions of the AAQ Controller, including heading and acquisition.
Lists and describes common alarm messages and their meanings within the AAQ GUI.
Provides steps to diagnose and resolve connection issues between the GUI and ACU.
Addresses common inaccuracies in acquiring satellites due to elevation and azimuth offsets.
Provides contact information and required details for AvL customer support.
To Next Page