３‐４
1. LCD Display
Shows machine status, icons, and design information.
2. Icon key – A, B, C, D, E, F, and G-keys
Operation buttons assigned to functions displayed on screen above by icons.
3. Page key
Switches display screens. *Refer to
9. Switching Screens
.
4. Shift Key
Switches screen for more function options
5. Origin LED
When lit, the pantograph is located at the origin.
Blinks when the Jog Keys are assigned to other functions.
6. Origin key
Moves the Pantograph to the origin.
When the pantograph is located at origin, it moves the pantograph to the previous position, the
position of the last stitch while the machine was in Drive mode.
7. Jog Keys
Moves the Pantograph. Single stroke gives 0.1mm movement. Holding the button gives
continuous movement and the speed of the pantograph gradually increases. It is also used to
move the cursor for selecting items from a list.
8. Panel Keys
All operations start from selecting one of the Panel Keys.
When entering a number, these keys become a numeric key pad.
*Refer to
2. Panel Switches
for more details.
9. Power ON/OFF Keys
Turns the machine ON and OFF.
To Next Page
Loading...