１‐３
！ Caution
◆ This machine is made for an industrial use.
This is an embroidery machine. Do not use for other applications.
◆ Read the instruction manual thoroughly and acknowledge the operation before running the
machine.
◆ Only those that know how to operate the machine should run the machine. Do not let other
personnel operate the machine.
◆ Operate the machine from the front. Do not load work to the machine from the backside.
◆ Keep hands and face away from needles, take-up lever, trimmer, shafts, pulley, belts, gears,
etc. Do not operate the machine without the protect covers for the shaft, pulley belt and fear
in place.
◆ Keep long hair, necklaces, and bracelets away from the machine while operating.
◆ Only one person should operate the machine. Having a multiple operators for one machine
may be dangerous as one operator may start t the machine while another is working on it.
◆ Before starting the machine, be sure nobody is near the machine.
◆ Keep children away from the machine while operating.
◆ Follow the electrical specifications instructed.
◆ Do not modify or dismantle the machine. It can cause fire or malfunction.
◆ Connect this embroidery machine to a properly grounded outlet only.
◆ Do not use the machine in the humid area. It can cause a fire or electrical shock.
◆ Do not damage, modify, pull or twist the power cable. Heating or heavy load to the cable
damages the cable and it can cause fire or electrical shock.
！ Warning
◆ Keep water or chemical substances away from the controller.
In case it happened, disconnect the power from the machine and call a service technician.
◆ Keep any metal items such as clips, safety pins scissors etc away from the controller to avoid
a short to the circuit, fire or electrical shock.
◆ Keep vases, flowerpots, cups, cosmetics, medicine, and chemical substances away from the
controller. They could cause fire or electric shocks.
◆ Disconnect the power to the machine and call a service technician if any foreign objects go
into the controller.
To Next Page
Loading...