１‐４
！ Caution Adjustment of the machine
◆ Stop the machine before threading the machine or checking the embroidery in process.
◆ Disconnect the power to the machine before turning any shafts by hand.
◆ Disconnect the power to the machine or turn OFF the machine power before opening the
controller.
！ Caution
◆ Avoid direct sunlight, heaters, boilers or any sources of the heat from the machine.
Do not use the machine outdoors.
◆ Do not use the machine near the fire of flame. It may cause fire.
◆ Clean the ventilation opening once a week.
Never operate the machine with any air openings blocked. Keep ventilation openings of the
machine free from the accumulation of lint, dust, and loose cloth.
◆ Unplug the power cable before servicing to the controller. Residual power may cause electric
shock. Wait for more than 4 minutes before opening the cover.
Some parts in the controller can be very hot. Be sure not to burn your hands.
◆ Use only attachment and parts recommended by Barudan.
Wrong parts can damage the machine.
◆ Do not use bent or wrong sized needles.
It can make a needle break or fabric damaged.
◆ Do not force the fabric while sewing. It can cause the needle to break or bend.
◆ Turn off all power switches and unplug the power cable after use.
*Follow the lubrication instruction on the machine.
To Next Page
Loading...