Baumuller b maXX 3000 - Page 132

Connections
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11 Baumüller Nürnberg GmbH
132
of 218
7.14
Encoder 
evaluation with
HIPERFACE DSL
®
The encoders, which meet the following technical specifications, can be used:
Signal level HIPERFACE DSL
®
Current input Max. 250 mA
D-sub-connector
26-pin
1 GND encoder supply
2 10 V encoder supply
3 reserved *
4 reserved *
5 reserved *
6 reserved *
7 reserved *
8 reserved *
9 reserved *
10 reserved *
11 reserved *
12 reserved *
13 reserved *
14 reserved *
15 reserved *
16 reserved *
17 reserved *
18 reserved *
19 DSL-
20 DSL+
21 reserved *
22 reserved *
21 reserved *
22 reserved *
23 reserved *
24 reserved *
25 reserved *
26 reserved *
* do not occupy
NOTE!
The use of the standard accessory connector included in the accessory kit 
HIPERFACE DSL
®
(part No. 460377) is required.