Connections
Instruction handbook b maXX BM3000, BM3200, BM3300
Document no. 5.11018.11 Baumüller Nürnberg GmbH
136
of 218
7.14
1-phase device without internal ballast resistor BM3XXX-XEXX-XXXXX-E-XXXXX-
Figure 56: Connections at the top, BM3XXX-XE without internal ballast resistor
X300:
Signal bus
X202:
Power supply connection
X205:
Connection
DC-link
Ballast resistor
X200:
24V-voltage supply
NOTE!
The ballast resistor connection is not short-circuit proof.
When using devices BM3200, BM3300 without internal ballast resistor an external
ballast resistor must be connected in case of braking operation.
To Next Page
Loading...