Troubleshooting
120 Transceivers 6200 Series DV14307.03 Issue 06 February 2021
Possible Cause / Proposed Solution
Antenna VSWR exceeds 3:1.
• Caused by a defective or insufficient counterpoise for the
antenna.
Proposed Solution
• Make sure for sufficient size of the counterpoise and make
sure there is no mechanical defect on the antenna.
• The impedance of the antenna cable is significantly different
from 50 Ω.
Proposed Solution
• Make sure that the antenna cable has 50 Ω impedance.
• Make sure that the cable is not bend on its way from the radio
• Defective BNC connectors on the antenna cable.
Proposed Solution
• Make sure the proper crimp/solder work on the BNC
For details about adjustments refer to "Configuration Setup", page 69).
To Next Page
Loading...
