Technical Data
30 Transceivers 6200 Series DV14307.03 Issue 06 February 2021
Software
1.8.7.1 AR620X Family Software
The design and development processes used for AR620X family software are compliant with the rules
given in EUROCAE/RTCA Document ED-12B/DO-178B; "Software Considerations in Airborne System
and Equipment Certification". Hereby ‘Design Assurance Level’ (DAL) "C" was followed. The complete
software documentation is based on this level.
Nevertheless, Becker claimed for AR6201 family software in accordance with
EUROCAE/RTCA Document ED-12B/DO-178B the:
Design Assurance Level D
Refer to AC 23.1309-1D and/or AC 23.1309-1E to see limitations for installations into aircraft.
The conditions and tests required for TSO approval of this article are minimum performance
standards. It is the responsibility of those installing this article either on or in a specific type or class of
aircraft to determine that the aircraft installation conditions are in the TSO standards. TSO articles
must have separate approval for installation in an aircraft. The article may be installed only in
compliance with 14 CFR part 43 or the applicable airworthiness requirements.
1.8.7.2 AR621X Family Software
The design and development processes used for AR621X family software are compliant with the rules
given in EUROCAE/RTCA Document ED-12B/DO-178B; "Software Considerations in Airborne System
and Equipment Certification". Hereby ‘Design Assurance Level’ (DAL) "C" was followed.
The complete software documentation is based on this level:
Design Assurance Level C
Hardware
The devices do not contain Complex Electronic Hardware (CEH).
Continued Airworthiness
A regular maintenance of the devices is not necessary:
• The maintenance is specified as "on condition" only.
• It is recommended to make a test of the frequency accuracy of the airborne transceiver
after 7 years.
To Next Page
Loading...
Need help?
General
