Becker RT6201 - Type Plate; Software;Firmware Status - Functionality; Figure 6: Type Plate (Example)

Installation
Becker Avionics
Device Assignment
46 Transceivers 6200 Series DV14307.03 Issue 06 February 2021
Type Plate
The device type is specified by the type plate (on the housing):
Example:
Figure 6: Type Plate (example)
Explanation:
PN:
Type designation:
AR6201, AR6211 = Single Block VHF Transceiver 58 mm (2¼ inch)
AR6203, AR6213 = Single Block VHF Transceiver 160 mm (3.6 inch)
RT6201, RT6211 = Remote-Controlled VHF Transceiver
RCU6201, RCU6211 = Remote Control Unit 58 mm (2¼ inch)
Options:
0XX: 8.33/25 kHz channel spacing
1XX: 25 kHz channel spacing only
X1X: 6 W @ 12 V, 10 W @ 28 V
X2X: 6 W @ 12 V
XX2: white illumination color on black panel
SN:
Unique number of the device
AN:
Article number
DoM:
Date of Manufacturing
Software:
Refer to the version on the device type plate
Compliance and Certifications:
Refer to the text and logos on the device type plate
Software/Firmware Status – Functionality
• The software version is shown at the screen for a few seconds after power on
This information is also available with the configuration setup → DEVICE INFO.
• The software versions are subject to change without notice.