Scope of Functionality
24 Transceivers 6200 Series DV14307.03 Issue 06 February 2021
Tandem Operation
• The tandem mode is for operation of two controllers at the same time.
• The controllers synchronizing each other, both show the same information.
Intercom Operation
• The built-in intercom circuit is for internal communication between pilots and passengers
with connected headsets.
• The 62XX system has two intercom circuits:
o "Front row" and "Back row".
o You can connect a maximum of four headsets, e.g. the pilot & copilot headsets to the
first circuit and two passenger headsets to second circuit.
Configuration Setup
The configuration setup is for the configuration of installation and device parameters such as mike
sensitivity, mike type selection, speaker enable/disable and other parameters.
Service Mode
• The service mode is a special configuration mode.
• You can get access to the service mode through the RS422 interface with a proprietary
serial data communication protocol.
• This mode is for use by authorized maintenance organizations only.
To Next Page
Loading...
Need help?
General
