Technical Data
DV14307.03 Issue 06 February 2021 Transceivers 6200 Series 39
1.8.14.5 FCC Approval
Radiofrequency radiation exposure information:
The approved equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. The equipment should be installed and operated with minimum distance of 50 cm
between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
NOTICE:
The approved equipment has been tested and found to comply with the limits for a 'Licensed Non-
Broadcast Station Transmitter' (VHF-Transceiver),, pursuant to Part 87 of the FCC Rules. It is
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
NOTICE:
This device complies with Part 87 of the FCC Rules [and with Industry Canada license-exempt
RSS standard(s)].
Operation is subject to the two conditions that follow:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
NOTICE:
Changes or modifications made to the approved equipment not expressly approved by Becker
Avionics may void the FCC authorization to operate this equipment.
To Next Page
Loading...
