54733-10BA2L
2 – 190 02.2017
2 Installation Volume 2
Please observe the safety instructions in Volume 1 on page 1-113.
A source may be transported only in its shielding. Keep the source
shielding closed during storage, transportation and installation.
The arrangement of the sources is defined during the planning stage
and entered in a drawing or defined in writing. These details must
be observed carefully to ensure correct linearization data.
Detailed information about the design and function of each shielding
being used can also be found in the drawings, which are included in
the documentation.
To Next Page
Loading...
