54733-10BA2L
3 – 442 02.2017
9 Setup Protocol Volume 3
Path Parameters Unit Standard SETUP
Meas Parameter Meas Settings
Time Const s 20
Nuclide Cs-137 / Co-60 Cs-137
Cal Method 1-POINT LIN
MULTIPOINT
1-POINT EXP
2-POINT EXP
MULTIPOINT
Cal Curve Type STANDARD / REVERSED STANDARD
Threshold % 60%
Hysteresis % 5%
Compensation Mode OFF
AUTO PRC
MANUAL GDA
AUTO GPC
OFF
Device Config Setup Sensor Configuration Date - Time
Date MM/DD/YYYY
Time hh:mm:ss
Device Config Setup Sensor Configuration Sensor Settings
Detector Code 0 ... 50 0
HV Mode AUTO / MANUAL
HV Live V
HV Average V
HV Manual V
HV Default V
Device Config Setup Signal Condition Signal Parameter
Time Const s 20
Error Handling NORMAL / SENSITIVE NORMAL
Signal Unlocked OFF / ON OFF
Device Config Setup Signal Condition Reading Range
Lower Range Value % 0
Upper Range Value % 100
To Next Page
Loading...
