BERTHOLD TECHNOLOGIES LB 480 - Page 443

SENSseries LB 480 Level measurement
BERTHOLD TECHNOLOGIES GmbH & Co. KG
3 – 443
Volume 3 9 Setup Protocol
3
Path Parameters Unit Standard SETUP
Device Config  Setup  Signal Condition  Signal Dependency
Response Mode DISABLED
RAPID SWITCH
RAD INTERFERENCE
DISABLED
Io Factor 1.5
Waiting Time s 60
RI Sigma 10
Meas Delay Time s 4
Device Config  Setup  I/O Setup  Current Output
Current Loop Monitoring DISABLED
ENABLED
ENABLED
Loop Alarm Type HIGH
LOW
HOLD LAST VALUE
VALUE
HIGH
Error Current Value mA 22.00
Current Lower Limit mA 3.80
Current Upper Limit mA 20.50