Display 110
12.8 Transparence
Transparence can be used to adjust the transparence of the message box of cursor, measure, Pass/Fail and all pop-up
menus to an appropriate value to observe the date more conveniently.
Under Cursor or Measure or any other menu operation, if want to change the transparence of the message box, do the
following steps:
1. Press the Display button on the front panel to enter the DISPLAY function menu.
2. Press the Next Page softkey to go to the second page of the Display function menu.
3. Press the Transparence softkey; and then turn the Universal Knob to select the desired value. The default value is
80%, and the range is from 20% to 80%.
To Next Page
Loading...
