System Settings 128
14.10 Screen Saver
When the oscilloscope enters the idle state and holds for a certain period of time, the screen saver program will be
enabled.
To set the screen saver time:
1. Press the Utility key on the front panel to enter the UTILITY function menu.
2. Press the Next Page softkey to go to the second page of the UTILITY function menu.
3. Press the Next Page softkey to go to the third page of the UTILITY function menu.
4. Press the Screen Saver softkey; and then turn the Universal Knob to select the desired screen saver time. The
screen saver time can be set to 1min, 5min, 10min, 30min, and 1hour. Also you can select O to turn o the
screen saver function
Figure 14.8 Screen Saver Interface
5. Press any button on the front to exit the screen saver program.
To Next Page
Loading...
