Blackmagicdesign ATEM - Page 169

Using External ATEM Hardware Panels
ATEM 1 M/E Broadcast Panel
The ATEM 1 M/E Broadcast Panel is designed for switchers with one mix effects panel,
orif you need a hardware panel to control a mix effects panel on a larger ATEM switcher
with more than one ME.
ATEM 2 M/E Broadcast Panel
This hardware control panel is designed to control two mix effects panels individually.
Thepanel can control two single ATEM switchers with one mix effects panel, such as
ATEMTelevision Studio models, or one of the larger ATEM Production Studio or
BroadcastStudio switchers that have 2 mix effects panels.
169