24.19
23 00 043
Dismantling and assembling
gearbox, checking individual compo-
nents
# Operations with powertrain cradle installed
Operations identified by
#
can also be carried out
with the powertrain cradle installed.
Preparations
For the sake of clarity, these illustrations show the
vehicle with the powertrain cradle removed.
– Removing powertrain cradle (
a
11.17)
Clean the individual components and check the
following parts for wear:
•
Bearings and seats of shaft oil seals
•
All gears for wear at tooth edges
•
Tooth profile of variator and output shafts
•
Gears for damage
C1110680
To Next Page
Loading...
