00.62
Checking windscreen washer
(Inspections I, II and III)
•
Check spray pattern of nozzles; adjust if neces-
sary
•
Use a screwdriver to adjust nozzles
•
Top up windscreen-washer fluid
Check windscreen wiper
(Inspections II, III and IV)
•
Check wiper blade for cracks
•
Check action of wiper arms
•
Check windscreen wipers and replace wiper
blade if necessary
a
................................................... See Group 61
Checking safety elements
(Inspections I, II, III and IV)
Check Bowden cable for central seat-
belt release
•
Use test gauge,
BMW No. 72 5 501
, to preten-
sion release lever
•
Engage seat belts in their buckles with an audi-
ble click
•
Move the handlebars all the way from left to right
and ensure that belt buckles do not disengage
•
If necessary, check Bowden cable for central
seat-belt release
Check belt straps and belt buckles
•
Fully unreel seat belts and check for damage
Check inertia reels
•
Once unreeled, belt must reel in automatically
when released
Check inertia-reel's detent mechanism
to ensure that it engages correctly
•
Engage seat belts in their buckles with an audi-
ble click
•
Pull firmly on belt strap and make sure that inertia
reel locks
C1610250
45°
45°
15°
C1720050
72 5 501
To Next Page
