00.19
Place C1 on stand
L
Note:
Note instruction plate on instrument trim!
e
Attention:
Excessive strain can damage the easy-lift mecha-
nism!
•
Hold C1 vertical
•
Centre the handlebar
•
Pull up short lever (2) on easy-lift mechanism
– The stand extends
L
Note:
The easy-lift mechanism has overload protection.
Fold out the stand with foot if necessary!
•
Push up long lever (1) on easy-lift mechanism
until it reaches the end of its travel
– The front wheel lifts clear of the ground
– Keep a firm grip on the lever
•
Slowly move the long lever (1) back until the de-
tent engages
•
Check to verify that the C1 is standing securely
C1000360
C100BA56
1
2
C1000370
1
To Next Page
