00.40
•
Release chain tensioner bolt (arrow)
•
Press chain tensioner to the outside using chain
tensioning rail
L
Note:
The bolts on the chain guide mechanism are se-
cured with thread-locking compound!
L
Note:
Watch bolt length and take care to install in correct
positions,
lettering is to the outside, use coloured marker to
identify end as necessary!
•
Detach mounts (arrows) from chain guide and re-
move
L
Note:
The camshafts can also be removed and installed
with the sprockets in place!
L
Note:
The camshaft sprocket is secured with locking com-
pound!
•
Undo bolts and remove camshaft sprokets
L
Note:
Make sure that the timing chain does not drop into
the housing. Use a retainer to keep timing chain ten-
sioned at all times!
•
Secure the timing chain to prevent it from falling
C1000231
C1110910
C1000190
To Next Page
Loading...
