EasyManuals Logo

Brocade Communications Systems FastIron X Series User Manual

Brocade Communications Systems FastIron X Series
593 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #538 background imageLoading...
Page #538 background image
device (config-vif-10-vrid-10)# ip-address 10.10.10.254
device (config-vif-10-vrid-10)# short-path-forwarding
device (config-vif-10-vrid-10)# activate
Syntax: no short-path-forwarding [ revert-priority value ]
The revert-priority value parameter uses the priority value as the threshold to determine whether the short-path forwarding (SPF)
behavior is
eective. Typically, when short-path forwarding is enabled, the Backup router enforces SPF. For each port that goes down,
the current priority of the VRRP-E router is lowered by the number specied in the track-port command. When the current priority is
lower than the threshold, the SPF behavior is temporarily suspended and reverts back to the pre-SPF VRRP-E forwarding behavior. The
value range is from 1 through 255.
Displaying short-path forwarding combinations
When short-path forwarding ( SPF) is congured, the output of the following show commands include the SPF information:
• show run
• show ip vrrp-e brief
• show ip vrrp-e vrid
The following example displays information about VRID 1 when only short-path forwarding is congured.
device# show ip vrrp-e vrid 1
VRID 1
Interface ethernet v100
state backup
administrative-status enabled
priority 110
current priority 90
hello-interval 1000 msec
dead-interval 0 msec
current dead-interval 3500 msec
preempt-mode true
virtual ip address 10.1.1.3
virtual mac address 0000.0089.7001
advertise backup: disabled
master router 10.1.1.1 expires in 00:00:02.6
track-port 1/1/13(down)
short-path-forwarding enabled
The following example displays information about VRID 1 when short-path forwarding and revert priority are
congured.
device# show ip vrrp-e vrid 1
VRID 1
Interface ethernet v100
state backup
administrative-status enabled
priority 110
current priority 90
hello-interval 1000 msec
dead-interval 0 msec
current dead-interval 3500 msec
preempt-mode true
virtual ip address 10.1.1.3
virtual mac address 0000.0089.7001
advertise backup: disabled
master router 10.1.1.1 expires in 00:00:02.7
track-port 1/1/13(down)
short-path-forwarding enabled revertible priority 80 not reverted
Additional VRRP and VRRP-E parameter conguration
FastIron Ethernet Switch Layer 3 Routing
538 53-1003627-04

Table of Contents

Other manuals for Brocade Communications Systems FastIron X Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brocade Communications Systems FastIron X Series and is the answer not in the manual?

Brocade Communications Systems FastIron X Series Specifications

General IconGeneral
BrandBrocade Communications Systems
ModelFastIron X Series
CategorySwitch
LanguageEnglish

Related product manuals