6-22 Confidential
(13) Secure the top side R with the screw (1piece).
(14) Close the front cover and back cover.
(15) Install the paper tray.
Fig. 6-31
< How to reset the 120K Kit >
(1) Press the Menu/Set, Black Start, , , and keys in this order to enter the maintenance
mode.
(2) Press the 8 and 0 keys in this order to indicate the LOG INFO message on the LCD, and
press the Black Start key several times until the “120K_CH:” message appears.
(3) Press the 2, 7, 8 and 3 keys in this order to reset the counter of the 120K Kit.
(4) Press the 9 key twice so that the printer returns to the standby status.
CAUTION
• This work is one of periodic replacement jobs, but cannot be the customer. This should be
implemented upon request of customer or at periodic maintenance.
• After the replacement, confirm the feeding of media such as plain paper, OHP, and stack
paper.
Screw
Top side R
Back cover
To Next Page
Loading...
