Bruker Anton Paar - Figure 10.8: Setting a New Temperature and Heating Rate with COMMANDER; Figure 10.9: Selecting Serialline;Power X1_RS232_I;-II for Serialconnector

Appendix / Service Details
106 DOC-M88-EXX268_V1_12.2016
Figure10.8: Setting a new temperature and heating rate with COMMANDER
3. For SerialConnector you have 4 possibilities to connect the RS232 communication
line. Standard is SerialLine/Power X1_RS232_I, see figure below:
Figure10.9: Selecting SerialLine/Power X1_RS232_I/-II for SerialConnector