Bruker Anton Paar - Figure 10.27: Chc_Stage Humidity Details

Appendix / Service Details
120 DOC-M88-EXX268_V1_12.2016
2. All CHC plus templates are configured for cooling with LN2. If you plan to use
compressed air cooling, the minimum temperature must be limited to ‑5°C. This can
be done by changing the Min. Temperature setting in Device| Goniometer|
Center| CHC_Stage| SampleTemperature (Figure 10.28) to ‑5°C.
Figure10.27: CHC_Stage Humidity Details