Canon EOS M2 - I Jumping through Images (Jump Display)

232
In the single-image display, you can turn the <5> dial to jump through the
images forward or backward according to the jump method set.
1
Select [Image jump with 5].
 Under the [x2] tab, select [Image jump
with 5], then press <0>.
2
Select the jump method.
 Press the <S> keys to select the
desired jump method, then press <0>.
d: Display images one by one
e: Jump 10 images
f: Jump 100 images
g: Display by date
h: Display by folder
i: Display movies only
j: Display stills only
k: Display by image rating (p.234)
3
Browse by jumping.
 Press the <x> button to play back
images.
 In the single-image display, turn the <5>
dial.
I Jumping through Images (Jump Display)
Playback position
Jump method
 To search images by shooting date, select [Date].
 To search images by folder, select [Folder].
 If the card contains both movies and still photos, select [Movies] or [Stills] to
display only one or the other.
 If no images match the selected [Rating], [Stills] or [Movies], you cannot
browse through the images with the <5> dial.