57
If the card is new or was previously formatted by another camera or
computer, formatting the card with the camera is recommended.
When the card is formatted, all images and data in the card will be
erased. Even protected images will be erased, so make sure there is
nothing you need to keep. If necessary, transfer the images and data
to a computer, etc., before formatting the card.
1
Select [Format card].
Under the [51] tab, select [Format card],
then press <0>.
2
Format the card.
Select [OK], then press <0>.
When the formatting is completed, the
menu will reappear.
For low-level formatting, press the
<B> button to append [Low level
format] with a checkmark [X], then
select [OK].
3 Formatting the Card
To Next Page
Loading...
