Canon EOS M2 - Start the Slide Show

245
3 Slide Show (Auto Playback)
4
Start the slide show.
 Select [Start], then press <0>.
 After [Loading image...] is displayed, the
slide show will start.
5
Quit the slide show.
 To quit the slide show and return to the
setting screen, press the <M> button.
[Display time][Repeat]
[Transition effect][Background music]
 To pause the slide show, press <0>. During pause, [G] will be displayed on
the upper left of the image. Press <0> again to resume the slide show. You
can also pause the slide show by tapping the screen.
 During the slide show, you can press the <B> button to change the still
photo display format (p.92).
 During movie playback, you can adjust the sound volume by turning the <5>
dial.
 During the slide show or during pause, you can press the <Y> <Z> keys to
view another image.
 During the slide show, auto power off will not work.
 The display time may vary depending on the image.
 To view the slide show on a TV set, see page 247.